If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Well,, we just finished Day 1 of our trip to The Netherlands. Great operation here. We've taken tons of pics. We're all tired and headed to dinner then bed! Paul, I can get your curves for ya.
ps: ask them about the stack height being an extra 1/2" too high on the rear suby camber plates (move the bearing up higher in the steel plate will fix it). Also the need to slot them another 3/8-1/2" so you can add more camber in the rear. Currently there is not enough range.
'11 Mustang GT / '95 Frankenpreza
"A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster."
- Dr. Clarkson
ps: ask them about the stack height being an extra 1/2" too high on the rear suby camber plates (move the bearing up higher in the steel plate will fix it). Also the need to slot them another 3/8-1/2" so you can add more camber in the rear. Currently there is not enough range.
I hope you guys are having a blast! Don't forget to stop by the Bulldog and definitely go downstairs
Comment