Thread: E36 LS1 Beta
View Single Post
  #22  
Unread 08-23-2007, 10:36 PM
Fair!'s Avatar
Fair! Fair! is offline
I blame the internet
 
Join Date: Jul 2004
Posts: 6,000
Default Re: E36 LS1 Beta

Update for 8-23-2007: After a bit of a delay the cage is complete in the Beta car. I went by DPH this afternoon and cleaned up the cage tubing with Scotch Brite pads and WD40. Should keep the steel from flash rusting from the humidity for a good while. Took some pictures with the seats out then back in again.

Completed cage pictures: pics from today





The door bars need to be welded in but I took pictures of the unwelded joints to show how tight Taylor gets these tubes.



Just look at those welds. This is the automotive equivalent of p0rn...
Reply With Quote