View Single Post
  #6  
Unread 06-21-2010, 05:04 PM
McCall's Avatar
McCall McCall is offline
I love TEIN!!!
 
Join Date: Jul 2004
Posts: 2,136
Default Re: McCall's Z3 M Roadtser LS1 Project

Update!!! Yes, it's on like Donkey Kong now and I WANT to get this car running before the end of the summer!

Fair delivered my beautiful new steering shaft & p1mp driveshaft. The driveshaft is in and I just got new bolts/nuts to mount it to the MZ3 diff so check that off the list. The steering shaft will be in (maybe tonight) so the car is officially a full rolling car again.

My credit card is still smoking as I just ordered the following-
LS6 intake/tb/fuel injectors
Techrod custom wiring harness
new plugs/wires
3 last adapters/fitting for the AN fuel system
Hawk HP+ pads F&R
Turn-One Power Steering Pump
Set-back shift lever (I hope it works)
gas pedal

Parts that have arrived and need to be installed-
E36 M3 front calipers/brackets (going to be selling off the non-vented Willwood set-up)
Two-piece M3 rotors
Sparco seats/slider
AN -8 fuel lines, fuel filter, fittings, adapters
FAST Fuel rail

Still to be done-
Mount ABS module (custom bracket needed)
New front hard brake lines L&R
Flare/fittings for both rear brake lines
New SS flex brake lines for the the front
Mount Radiator (custom brackets needed)
Determine radiator hoses/overflow solution
full custom exhaust
Find used headlights
install dash/center console
wiring, wiring, wiring

So, in the coming weeks I'll be working on this inbetween travel and the $2010 project car. I might also try to plan a few works nights to get some help knocking this stuff out. Pizza/beer will be offered up!
__________________
McCall
Reply With Quote